Synthetic Water Resistant Grease (GWR)
 Synthetic Water Resistant Grease NLGI#2 (GWR)

Superior Lubrication and Protection in Automotive and Industrial Applications With Extensive Exposure to Water

Package sizes include:

3-oz. Cartridges (not sold individually, comes in a pack of 3)
3-oz. Cartridges (case of 10)
14-oz. Cartridge
14-oz. Cartridges (case of 10 & 40)
35-lb. Lug
120-lb. Keg

Product Code: GWR • Brand: AMSOIL




MSDS Data Sheet

Product Details Tech Data Reviews & RatingRelated Videos

Product Applications
AMSOIL Synthetic Water Resistant Grease meets the highest performance standards set by the National Lubrication Grease Institute (NLGI), GC for wheel bearing applications and LB for chassis applications. It may be used in automotive wheel bearings, chassis or other applications for which an NLGI No. 2 GC or LB grease is recommended. Its unique water-resistant formulation makes it ideal for use in components or equipment with frequent or prolonged water exposure.

Product Description
AMSOIL Synthetic Water Resistant Grease is an extreme-pressure grease formulated specially for wet-duty performance. Composed of premium-quality synthetic base oils and calcium sulfonate complex thickeners, Water Resistant Grease provides exceptional film strength, shear resistance, adhesion properties and mechanical stability. Its water washout and sprayoff resistance are outstanding for applications frequently exposed to water, mud, snow or ice, including ATVs, UTVs, snowmobiles and boat trailers.

Water Washout and Sprayoff Protection
AMSOIL Synthetic Water Resistant Grease gains its wet-duty performance from its superior cohesiveness and adhesiveness. It holds together when exposed to water and clings tenaciously to metal surfaces when wet. Components remain protected during prolonged exposure to standing or pressurized water.

Corrosion Protection
AMSOIL Synthetic Water Resistant Grease protects metal surfaces from corrosion, which may be worsened by frequent or prolonged water contact. It seals metal surfaces and chemically fights corrosion.

Load-Carrying and Extreme-Pressure Performance
AMSOIL Synthetic Water Resistant Grease protects components from metal-to-metal contact even under heavy loads. Its extreme-pressure additives protect against sustained or sudden extreme loads for dependable protection against wear.

Compatibility
AMSOIL Synthetic Water-Resistant Grease is compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Water-Resistant Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL INC.

AMSOIL Product Availability
AMSOIL Synthetic Water Resistant Grease is available in 3-oz. cartridges, 14-oz. cartridges, 35-lb. lugs and 120-lb. kegs.

HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS).

Click here to view the MSDS Data Sheet for AMSOIL GWR.

Keep out of the reach of children. Don't pollute. Return used oil to collection centers.

Typical Technical Properties
Synthetic Water Resistant Grease (GWR) GWR NLGI GC/LB Requirements
Thickener calcium sulfonate complex NR*
NLGI consistency grade 2 NR*
NLGI performance grade GC-LB NR*
Penetration (ASTM D-217) (25°C [77°F], 0.1 mm) worked 60 strokes 277 220-340 min
Operating Range °F (°C) -40 to 350 (-40 to 177) NR*
Dropping point, °F (°C) (ASTM D-2265) >500 (>260) 428 (220) min
High temperature life, hours (ASTM D-3527) 115 80 min
Water washout, percent (ASTM D-1264) 1.25 15 max
Rust and corrosion (ASTM D-1743) pass pass
Oil separation, percent loss (ASTM D-1742) (24 hours, 25°C [77°F]) 0 6.0 max
Leakage, g lost (ASTM D-4290) 4.2 10 max
Four-ball wear test, mm scar (ASTM D-2266) 0.42 0.60 max
Fretting wear, mg (ASTM D-4170) 2.5 10 max
Four ball EP, kgf (ASTM D-2596) Weld point Load wear index   500 70   200 min 30 min
Timken OK load test, lbs (ASTM D-2509) 70 NR*
Low-temperature torque, N”¢m (ASTM D-4693) (-40°C [-40°F]) 6.8 15.5 max
Oil viscosity, 40°C (104°F), cSt 165 NR*
Color blue NR*
Texture smooth with tack NR*
*NR: Not required for NLGI GC-LB labeling

AMSOIL Tech Tips - Greasing Trailer Bearings

How To Get Your Boat Ready for Storage

Did this product meet your expectations?

(click on a star to rate)
Product Name:
Current Rating: 5 out of 5 stars
Total Votes: 1 vote(s)

Share your AMSOIL Experience
by writing a review
smaller | bigger





Click Here to Report Problems Or Comments
Receive AMSOIL's Confidential Factory Direct Wholesale Price List in your email.
Enter your first name & email address and click on "eMail Price List" button!
AMSOIL Online Store
AMSOIL Preferred Customer Program. Save upto 25%!
Wholesale Business Accounts
Become an AMSOIL Dealer!
Request FREE AMSOIL Catalog
Questions? Please Contact us
Order AMSOIL By Phone
AMSOIL Online Store
Order AMSOIL By Fax
VISA and MASTERCARD is accepted for US and Canada.
Discover and American Express is accepted for US customers only
Go to Top

Select your country.

Canada
Ships from Canada. Prices in CA dollars.
United States
Ships from USA. Prices in US dollars.